GE Datex-Ohmeda Aespire View Anesthesia Machine
The GE Datex Ohmeda Aespire View is compact, durable, with easy to clean surfaces. It comes with a 12-inch ventilation display that showcases waveforms and alarm indicators. The Aespire offers both anesthesia gases and ventilation at the same time. The Aespire View uses the GE SmartVent 7900 as the ventilator system for the anesthesia machine. The ventilation system makes it easy to minimize the space in the ICU or operating room by combining the Ventilator and the anesthesia machine in one. The Aespire View also comes standard with GE’s advances Breathing System (ABS). This allows the anesthesia machine to work with low circuit volumes as well as low flow anesthesia.
The GE Datex Ohmeda Aespire View is compact, durable, with easy to clean surfaces. It comes with a 12-inch ventilation display that showcases waveforms and alarm indicators. The Aespire offers both anesthesia gases and ventilation at the same time. The Aespire View uses the GE SmartVent 7900 as the ventilator system for the anesthesia machine. The ventilation system makes it easy to minimize the space in the ICU or operating room by combining the Ventilator and the anesthesia machine in one. The Aespire View also comes standard with GE’s advances Breathing System (ABS). This allows the anesthesia machine to work with low circuit volumes as well as low flow anesthesia.
- Small breathing system volume rapidly response to fresh gas changes with the ABS (Advanced Breathing System).
- Fewer parts to help prevent unwanted disconnects and leaks.
- Bag-to-vent switch works without electronics in case of power failure.
- Autoclavable and latex-free surfaces.
- Optional EXChange and condenser.
- Extra large work surface area.
- Two storage drawers.
Dimensions
| Height: | 53.5 in (136 cm) |
|---|---|
| Width: | 29.5 in (75 cm) |
| Depth: | 29.1 in (74 cm) |
| Weight: | Approximately 300 lbs (136 kg) |
Ventilation Operating Modes
| VCV | |
| PCV | |
| SIMV/PSV | |
| PSVPro with Apnea backup | |
| SIMV-PC | |
| PCV-VG |
Ventilator (VT) Parameter Ranges
| Tidal volume range: | 20 to 1500 mL (Volume Control SIMV/PSV and PCV-VG modes); 5 to 1500 mL (Pressure Control Mode) |
|---|---|
| Incremental settings: | 20 to 50 mL (increments of 1 mL); 50 to 100 mL(increments of 5 mL); 100 to 300 mL (increments of 10 mL); 300 to 1000 mL (increments of 25 mL); 1000 to 1500 mL (increments of 50 mL) |
| Minute volume range: | 0 to 99.9 L/min |
| Pressure (PInspired) range: | 5 to 60 cm H2O (increments of 1 cm H2O) |
| Pressure (Plimit) range: | 12 to 100 cm H2O (increments of 1 cm H2O) |
| Pressure (Psupport) range: | Off, 2 to 40 cm H2O (increments of 1 cm H2O) |
| Rate: | 4 to 100 breaths per minute for PCV-VG, Volume Control and Pressure Control vent modes. 2 to 60 breaths per minute for SIMV/PSV, PSVPro and SIMV vent modes (increments of 1 breath per minute). |
| Inspiratory/expiratory ratio: | 2:1 to 1:8 (increments of 0.5) |
| Inspiratory time: | 0.2 to 5.0 seconds (increments of 0.1 seconds) (SIMV and PSVPro vent modes) |
| Trigger window: | 0 to 80% (increments of 5%) |
| Flow trigger: | 0.2 to 1.0 L/min (increments of 0.2 L/min); 1 to 10 L/min (increments of 0.5 L/min) |
| Inspiration termination level: | 5 to 75% (increments of 5%) |
| Backup mode delay: | 10 to 30 seconds (increments of 5 seconds) |
Positive End Expiratory Pressure (PEEP)
| Type: | Integrated, electronically controlled |
|---|---|
| Range: | OFF, 4 to 30 cm H2O (increments of 1 cm H2O) |
Ventilator Performance
| Pressure range at inlet: | 240 kPa to 700 kPa; 35 psig to 100 psig |
|---|---|
| Peak gas flow: | 120 L/min + fresh gas flow |
| Flow valve range: | 1 to 120 L/min |
Ventilator Monitoring
| Expiratory minute volume range: | 0 to 99.9/min |
|---|---|
| Expiratory tidal volume range: | 0 to > 1500 mL |
| O2%: | < 5 to 110% |
| Peak pressure: | –20 to 120 cm H2O |
| Mean pressure: | –20 to 120 cm H2O |
| Plateau pressure: | 0 to 120 cm H2O |
| Pressure waveform sweep speed: | 4 to 25 breaths per minute (0 to 16 seconds); 26 to 75 breaths per minute (0 to 8 seconds); 75 breaths per minute (0 to 4 seconds) |
Delivery and Monitoring Accuracy
| Volume delivery: | > 210 mL = better than 7%; < 210 mL = better than 15 mL; < 60 mL = better than 10 mL |
|---|---|
| Pressure delivery: | ±10% or ±3 cm H2O |
| PEEP delivery: | ±1.5 cm H2O |
| Volume monitoring: | > 210 mL = better than 9%; < 210 mL = better than 18 mL; < 60 mL = better than 10 mL |
| Pressure monitoring: | ±5% or ±2 cm H2O |
Operating Environmental Specifications
| Temperature: | 10° to 40°C/50° to 104°F |
|---|---|
| Humidity: | 15 to 95% relative humidity |
| Altitude: | –440 to 3565 m/500 to 800 mmHg |
Storage Environmental Specifications
| Temperature: | –25° to 65°C/–13° to 149°F |
|---|---|
| Humidity: | 15 to 95% relative humidity |
| Altitude: | –440 to 5860 m/375 to 800 mmHg |
| Oxygen cell storage: | –15° to 50°C/5° to 122°F; 15 to 95% relative humidity; 500 to 800 mmHg |
For new products, please refer to the manufacturer’s website for details.
This product has been refurbished and tested to the highest quality standards by The PCB Medical. This Limited Warranty offered by PCB Medical covers defects in material or workmanship. This warranty extends to the original purchaser only and is nontransferable. The warranty begins the day the equipment is received. Please inspect your item(s) upon delivery. Any unauthorized service providers working on our equipment within the warranty period will void the warranty!
Our warranty periods are very based on product, a standard 30 day parts warranty is included with all refurbished parts unless stated otherwise on the quote/Invoice. Warranties begin from the documented date of receipt.
Our warranties do not cover any problem that is caused by: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
Our limited warranties are void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).
PCB Medical will not provide any warranty coverage unless claims are made in compliance with all terms of the controlling warranty statement included with your product and you follow proper return procedure. To request warranty service, you will need to provide: 1. The invoice or other evidence of the date and place of purchase. 2. A description of the problem. 3. Contact our Customer Service Department to receive a Return Authorization Number (RMA#)
Damaged freight needs to be reported within 24 hours to file a claim. No merchandise may be returned without prior written authorization by PCB Medical.
No NEW merchandise may be returned unless authorization from manufacturer which could result in a restocking fee or no return at all, and customer is responsible for shipping expenses.
Return period for products is thirty (30) days from delivery or otherwise agreed upon.
The PCB Medical will test returned products returned and can impose a customer fee if the customer misrepresents the condition of the product.
Credit & Return Shipping Guidelines
Order cancellations (after 24 hours) and returns are charged a 45% restocking fee. Damaged goods will receive credit dependent on the condition of the product, and customer is responsible for shipping expenses.
No credit will be issued if the item is non-returnable, such as a new product, custom or special order, or in the case that the item is damaged due to improper handling/packaging by the customer.
Shipping Charges: Customers are responsible for making sure items can be delivered into or outside of their facility without issue. For example, can a 53’ foot truck access your building? Failure to accommodate delivery can result in items not being delivered, additional fees, or return of equipment.
Basic Shipping Charge is for dock to dock shipping and/or liftgate service shipping. The items shipping dock to dock and/or liftgate are skidded/palletized items. It doesn’t not include inside delivery.
Residential shipping charge is for customer’s needing delivery in a residential area.
Inside delivery is for customer’s needing their purchase delivered inside the building. The item(s) will be delivered into the lobby only. They are not delivered into rooms/suites, elevators, or stairs.
Customers are responsible for disposing of packing materials.
If you are needing white glove delivery, please contact us directly at info@pcbhme.com
