Philips HeartStart MRx ALS Defibrillator / EMS Monitor
The Philips Heartstart MRx is a lightweight, portable monitor/defibrillator. with the capability to offer four different modes of operation; monitor, manual Defibrillate, AED, and pacing. The Heartstart MRx defibrillator was designed to provide both monitoring and resuscitation by using mutual-parameter functions, including algorithms and options for transferring data to, a full range of defibrillation therapies. The Heartstart MRx is fast and reliable with 12-lead ECG and advanced STEMI support. The MRx has a large 8-inch color screen that can display up to 4 waveforms and numerics. The Philips Heartstar MRx additionally monitors other parameters: arrhythmia detection, SpO2, NIBP, IBP, EtCO2, and temperature.
The Philips Heartstart MRx is a lightweight, portable monitor/defibrillator. with the capability to offer four different modes of operation; monitor, manual Defibrillate, AED, and pacing. The Heartstart MRx defibrillator was designed to provide both monitoring and resuscitation by using mutual-parameter functions, including algorithms and options for transferring data to, a full range of defibrillation therapies. The Heartstart MRx is fast and reliable with 12-lead ECG and advanced STEMI support. The MRx has a large 8-inch color screen that can display up to 4 waveforms and numerics. The Philips Heartstar MRx additionally monitors other parameters: arrhythmia detection, SpO2, NIBP, IBP, EtCO2, and temperature.
- Easy to use Interface with a large color display
- Can Display 4 waveforms and numerics, or all 12 leads and numerics
- Screen views can be customized to fit the user’s preferences
- Normal or high-contrast view of easy viewing in different lighting conditions
- Seamless data transmission for 12 lead ECGs with optimal wireless link
- 10 hours of monitoring with 2 fully charged batteries
- Ready-For-Use indicator
- optimal AC or DC battery options
MRx Dimensions (Without External Paddles)
| Width: | 12.4 in (31.3 cm) |
|---|---|
| Depth: | 8.3 in (21 cm) |
| Height: | 11.7 in (29.5 cm) |
MRx Dimensions (With External Paddles)
| Width: | 13.4 in (34 cm) |
|---|---|
| Depth: | 8.3 in (21 cm) |
| Height: | 13.6 in (34.5 cm) |
Weight
| 13.2 lbs. (6kg): | Base unit with 1 MRx battery, pads, and pads cable. |
|---|---|
| +4.1 lbs. (1.86 kg): | With added MRx carrying case. |
| +2.5 lbs. (1.1 kg): | With added MRx paddle tray and external standard paddles. |
Environmental
| Water Resistance: | Meets IEC 60601-2-4 |
|---|---|
| Solids Resistance: | IP2X |
| Temperature: |
|
| Humidity: | Operating: 0% to 95% relative |
| Safety: | Meets EN 60601-1, UL 2601-1, CSA C22.2 No. 601-1-M90 CSA, EN 60601-2-4 |
MRx Display
| Dimensions: | 8.4 in diagonal (12.8 cm x 17.1 cm) |
|---|---|
| Type: | TFT color LCD |
| Resolution: | 640 x 480 pixels (VGA) |
| Wave Viewing Time: | 5 seconds (ECG) |
Strip Chart Printer
| Printer: |
|
|---|---|
| Continuous ECG Strip: | Prints primary ECG lead with event annotations and measurements in real-time or with 10-second delay. |
| Auto Printing: | Printer can be configured to print marked events, charge, shock, and alarms. |
| Reports: | Event Summary, 12-Lead, Vital Signs Trending, Operational Check, Configuration, Status Log, and Device Information. |
| Paper Size: |
|
Defibrillator
| Model: | MRx (M3535A) |
|---|---|
| Waveform: | Biphasic Truncated Exponential. Waveform parameters adjusted as a function of patient impedance. |
| Output Energy: | Manual (selected): 1-10, 15, 20, 30, 50, 70, 100, 120, 150, 170, 200 Joules maximum energy, limited to 50 Joules for internal defibrillation. AED Mode (single energy output): 150 Joules into a 50 ohm load. |
| Charge Time on the MRx: | Less than 5 seconds to 200 Joules with a new, fully charged lithium ion battery at 25º C. |
| Shock Delivery: | Via multifunction defib electrode pads or paddles. |
| Quick Shock: | Less than 10 seconds from cessation of CPR to shock delivery. |
| Patient Impedance Range: |
|
| AED Mode on the MRx: | Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines. |
MRx Battery
| Type: | 6.0 Ah, 14.8 V, rechargeable lithium ion. |
|---|---|
| Dimensions: |
|
| Charge Time: | Approximately 3 hours to 100%, 2 hours to 80%. |
| Capacity: |
|
| Battery Indicators: | Battery gauge on battery, capacity indicator on display; flashing RFU indicator, chirp, and ‘Low Battery’ message appears on display for low battery condition, when 10 minutes of monitoring time and 6 maximum energy discharges remain (with a new battery at room temperature, 25º C). |
Data Storage
| Internal: | 12 hours of continuous ECG waveforms and events, maximum capacity of 55 event summaries. |
|---|---|
| Data Card: | 60 event summary reports or 240 megabytes of patient data. |
ECG and Arrhythmia Monitoring
| Input: |
|
|---|---|
| Lead Fault: | ‘Lead Off’ message and dashed line displayed, if an electrode or lead wire becomes disconnected. |
| Pads Fault: | Dashed line displayed if a pad becomes disconnected. |
| Heart Rate Display: | Digital readout on display 15 to 300 bpm, accuracy ±10%. |
| Heart Rate Arrhythmia Alarms: | HR, Asystole, VFIB/VTACH, VTACH, extreme tachycardia, extreme bradycardia, PVC rate, Pacer not capture, Pacer not pacing. |
| ECG Size: | 2.5, 5, 10, 20, 40 mm/mV, autogain. |
Available Options
| Non-Invasive Pacing: | SpO2 pulse oximetry. |
|---|---|
| Non-Invasive Blood pressure: | CO2 monitoring. |
| Invasive Blood Pressure (2 lines): | Continuous temperature monitoring. |
| 12-Lead Acquisition: | 12-lead transmission. |
| Q-CPR Measurement and Feedback: | Audio recording. |
| ACI-TIPI & TPI Predictive Instruments: | Periodic clinical data transmission. |
| Batch/LAN Data Transfer | |
For new products, please refer to the manufacturer’s website for details.
This product has been refurbished and tested to the highest quality standards by The PCB Medical. This Limited Warranty offered by PCB Medical covers defects in material or workmanship. This warranty extends to the original purchaser only and is nontransferable. The warranty begins the day the equipment is received. Please inspect your item(s) upon delivery. Any unauthorized service providers working on our equipment within the warranty period will void the warranty!
Our warranty periods are very based on product, a standard 30 day parts warranty is included with all refurbished parts unless stated otherwise on the quote/Invoice. Warranties begin from the documented date of receipt.
Our warranties do not cover any problem that is caused by: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
Our limited warranties are void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).
PCB Medical will not provide any warranty coverage unless claims are made in compliance with all terms of the controlling warranty statement included with your product and you follow proper return procedure. To request warranty service, you will need to provide: 1. The invoice or other evidence of the date and place of purchase. 2. A description of the problem. 3. Contact our Customer Service Department to receive a Return Authorization Number (RMA#)
Damaged freight needs to be reported within 24 hours to file a claim. No merchandise may be returned without prior written authorization by PCB Medical.
No NEW merchandise may be returned unless authorization from manufacturer which could result in a restocking fee or no return at all, and customer is responsible for shipping expenses.
Return period for products is thirty (30) days from delivery or otherwise agreed upon.
The PCB Medical will test returned products returned and can impose a customer fee if the customer misrepresents the condition of the product.
Credit & Return Shipping Guidelines
Order cancellations (after 24 hours) and returns are charged a 45% restocking fee. Damaged goods will receive credit dependent on the condition of the product, and customer is responsible for shipping expenses.
No credit will be issued if the item is non-returnable, such as a new product, custom or special order, or in the case that the item is damaged due to improper handling/packaging by the customer.
Shipping Charges: Customers are responsible for making sure items can be delivered into or outside of their facility without issue. For example, can a 53’ foot truck access your building? Failure to accommodate delivery can result in items not being delivered, additional fees, or return of equipment.
Basic Shipping Charge is for dock to dock shipping and/or liftgate service shipping. The items shipping dock to dock and/or liftgate are skidded/palletized items. It doesn’t not include inside delivery.
Residential shipping charge is for customer’s needing delivery in a residential area.
Inside delivery is for customer’s needing their purchase delivered inside the building. The item(s) will be delivered into the lobby only. They are not delivered into rooms/suites, elevators, or stairs.
Customers are responsible for disposing of packing materials.
If you are needing white glove delivery, please contact us directly at info@pcbhme.com
